|
|
For Aluminum, Wood, Plastics & Fiberglass*
Offers big machine production at a price that even the smallest shops can afford.
EMN Manual Double
Miter Saws
Models EMN-12 and EMN-14
Extremely versatile.
EMN-12 List Price $4955.00
Call for Special framingsupplies.com Price
EMN-14 List Price $5750.00
Call for Special framingsupplies.com Price
- Front safety guard is constructed of heavy gage steel for maximum operator protection. Machine should never be operated without the safety guard installed and adjusted to its lowest position. Safety guard is removable to change sawblades.
- Manual operation via footpedal which is only 12" off the floor. Only 7" of travel is necessary to complete stroke of sawblades. No heavy pressure is required, sawblades do all the work. Leaves hands free to hold material. Easy to regulate speed of cutting. Counterbalanced sawheads return automatically.
- Cabinet type stand, improves appearance and helps keep dust to a minimum.
- Optional "foot" for adjustable support leg, allows bolting to floor if desired.
- Totally enclosed fan cooled ball bearing motors.
- Optional sawblade lubrication system for lubricating sawblades when cutting aluminum. System requires an external source of compressed air.
- Sawhead chamber adjustment.
- Optional precision made, job matched carbide sawblades to suit your specific applications.
- Precision ground 1" steel plate work table.
- Optional Mitersize gauge shown is designed to provide rabbet measurements for picture frames. Many other gauges are available.
Sawblades will cut nearly any material in one cycle of the sawheads , not repeated chopper-like passes. Each cut is a finish cut suitable for assembly. No material supports are necessary since no pressure is exerted against the work piece. Will easily cut any flat shape, and with fixturing will handle small reverses and shell-type moldings.
 |
FEATURES: |
| 230 volt, 1 phase electrics standard. No expensive installation required. | |
| Simple and effortless to use. Anyone can become quite efficient and accomplished in operating this machine. | |
| Side scrap discharge chute keeps scrap away from operator. Simple disposal into container. | |
| Machine is virtually maintenance free, eliminating costly downtime. Keeping blades sharp is your only requirement for continuous trouble-free operation. | |
| Complete line of gages and quality carbide sawblades available. | |
|
Shown with front safety guard removed for illustration purposes. |
No compressed air required. |
|
|
MODEL EMN-12 shown with optional spray mist system.
Optional pneumatic power feed kit includes air cylinder with mounting clevis, flow control hoses, fittings and foot pedal. Requires an external source of compressed air. Unit can be factory installed, or simply installed at a later time by drilling six clearance holes in the cabinet and foot treadle. |
|
| 1. Precision ball bearing spindle driven by a single Poly-Vee belt and matching pulleys. Poly-Vee belts run smooth and quiet. High quality cuts require minimum vibration. Spindle bearings are available in cartridge form and are simple to remove and replace if necessary. | ||
| 2. Shown with belt guard removed for illustration purposes. Machine should never be operated with any guards removed. | ||
| 3. Interconnected link arms assure simultaneous cutting and are provided with self aligning bearings at both ends. | ||
| 4. One gallon translucent bottle for optional Venturi Type spray mist system. | ||
| 5. Adjustable flow hydraulic cylinder controls speed of sawhead return. | ||
| 6. Optional sawdust exhaust duct is provided with a single 5" outlet. For proper dust collection a minimum of 850 CFM air volume is required | ||
|
Cutting capacity chart for models EMN-12 & 14 only. The chart illustrates the actual miter cutting capacity for varying heights and widths of material. |
||
| Red shaded area is the approximate miter cutting capability of model EMN-14. |
|
Grey shaded area is the approximate miter cutting capability of model EMN-12. |
|
|
Pistorius Double Miter Cut-Off Saws Information